FortisBC or BC Hydro? Check your billCall 250-250-2525
SOLAR INSTALLATIONKelowna

SERVICE 01 · HOMES · SHEET 02

Residential Solar Installation in Kelowna

From the first look at your bills to the day FortisBC sets your meter: one plan, one point of contact, and the whole installation written down before you sign.

Stucco family home in Kelowna with a finished black solar array on its south-facing roof

OVERVIEW

What a home installation in Kelowna actually involves

Residential solar installation in Kelowna follows the same path on almost every house. We look at a year of FortisBC bills, the roof, the shade and the electrical panel. We design a system sized to your use, apply to FortisBC for net metering, pull the electrical permit, install, pass inspection and switch on.

Most homes need between 5 and 12 kW, which is 12 to 28 panels. Install day is the short part: one to three days on the roof. The paperwork around it takes longer, and it is where installations stall if nobody owns it. We own it, and you get the timeline in writing.

Call 250-250-2525 and we can usually tell you in one call whether your roof is worth a visit.

Roof mid-installation with aluminium rails across dark shingles and the first black modules clamped in place
FIG. S1 Rails go on first, fixed to rafters through flashed mounts. Modules are the last thing on the roof.

SPEC SHEET

Residential Solar Installation at a glance

Typical size
5–12 kW (12–28 panels), sized to your annual kWh
Time on site
1–3 days for most homes
Start to switch-on
6–10 weeks, mostly permits and FortisBC approval
Utility step
FortisBC net-metering application and Interconnection Agreement
Permits
Technical Safety BC electrical permit; City permit if structural work is needed
Warranties
Manufacturer warranties on panels and inverter, plus a written workmanship warranty

INCLUDED

Included in every home installation

  1. 01

    Usage and roof assessment

    A year of bills, roof planes and pitch, shade through the seasons and the panel box.

  2. 02

    A drawn layout

    You see exactly where every panel goes, and how it looks from the street, before you sign.

  3. 03

    FortisBC application

    We file the net-metering application and handle questions until approval to build.

  4. 04

    Permits and inspection

    The electrical permit, the inspection and any City paperwork.

  5. 05

    Installation

    Flashed mounts, rails, modules, inverter, disconnect and wiring by licensed crews.

  6. 06

    Switch-on and handover

    Commissioning, monitoring set-up, and a folder with every document and photo.

PRICE

What home solar costs to install in Kelowna

SystemInstalled priceFortisBC: year-one value · paybackBC Hydro: net of rebate · payback
5 kW 12 panels · ~6,000 kWh/yr home$14,000 – $17,500$930 · year 15$10,600 after $5,000 · year 13
8 kW 19 panels · ~9,600 kWh/yr home$20,900 – $26,000$1,488 · year 14$18,200 after $5,000 · year 14
10 kW 23 panels · ~12,000 kWh/yr home$25,500 – $31,700$1,860 · year 14$23,300 after $5,000 · year 14
12 kW 28 panels · ~14,400 kWh/yr home$30,100 – $37,400$2,232 · year 13$28,400 after $5,000 · year 15

Installed price ranges, not quotes, as of October 2026. Each size assumes a home using about as much as the system makes (1,200 kWh per kW a year). FortisBC value at about 15.5¢/kWh; BC Hydro shown for comparison (rebate, 40% self-use, 10¢ exports). Paybacks use the mid price and a 3% yearly rate rise.

Book an assessment Rebates and utility rules

UTILITY

Your utility sets the paperwork

Every Kelowna home is on FortisBC. If you are reading this from across the bridge, the BC Hydro tab shows what changes.

WHAT NAME IS AT THE TOP OF YOUR POWER BILL?

FORTISBC — WHAT APPLIES

Solar rebate
None
Exports
Banked as kWh, used in later bills
Year-end surplus
Settled once a year at a low rate
Size limit
50 kW, sized to your yearly use
Paperwork
Net-metering application → approval to build → Interconnection Agreement
8 kW payback
about year 14

This is you if you live anywhere in Kelowna.

BC HYDRO — WHAT APPLIES

Solar rebate
$1,000/kW, up to $5,000
Exports
Flat 10¢/kWh on each bill (since July 1, 2026)
Year-end surplus
No bank; credited as you go
Size limit
Up to 300 kW on the self-generation rate
Paperwork
Rebate via an HPCN member; self-generation application
8 kW payback
about year 14, after the rebate

Across the bridge, not in the City of Kelowna.

A MUNICIPAL UTILITY — WHAT APPLIES

Solar rebate
Depends on the city
Exports
Set by the municipal utility
Year-end surplus
Varies
Size limit
Varies
Paperwork
Apply to the city’s electric utility
8 kW payback
Modelled case by case

Outside Kelowna; ask us and we’ll check the rules.

ROOF CHECK

Three things we check before quoting

  • Roof age. Less than about ten years left? Re-roof first, or together. Removing and refitting panels later costs $3,000–$5,000.
  • Pitch and planes. South, south-west and west work best; east and west lose roughly 10–20% against due south, which we show for your roof.
  • Panel box. Older 100 A services may need an upgrade to take a solar breaker. It goes in the quote, not on install day.
Roof-to-meter cutaway of a home solar installation Section drawing of a house: modules on rails over flashed mounts on the roof, a conduit run down to an inverter and disconnect on the wall, then the panel box, the bidirectional meter and the grid line. typical home: 18–24 modules · 8–10 kW 12345678910
  1. 1Solar modulesAll-black 400–450 W panels, sized and laid out to your use.
  2. 2Rails & clampsAluminium rails that hold the modules a few centimetres off the roof.
  3. 3Mounts & flashingLag-bolted into rafters with flashing under the shingle or a tile hook.
  4. 4Roof deckChecked before anything goes on it. Old shingles get replaced first.
  5. 5Conduit runWiring from the array to the inverter, strapped and sealed.
  6. 6InverterTurns the panels’ DC into AC your home uses.
  7. 7DisconnectA lockable switch so crews can isolate the system.
  8. 8Panel boxThe solar breaker lands here. Older 100 A panels may need an upgrade.
  9. 9Bidirectional meterSet by FortisBC to count power both ways for net metering.
  10. 10GridFortisBC’s lines, which bank your surplus as kWh credit.
FIG. C Parts of a typical home installation. Ask any installer to price each of them.

TIMELINE

From first visit to switch-on

The usual sequence for a Kelowna installation. Your written plan carries real dates.

How installation works, step by step

Typical Kelowna home solar installation timeline Seven steps over about nine weeks: assessment in week 0 to 1, design and quote in week 1 to 2, FortisBC application in weeks 2 to 5, permits in weeks 3 to 5, installation in week 5 to 6, inspection in week 6 to 7, interconnection and switch-on in weeks 7 to 9. W0W1W2W3W4W5W6W7W8W9W1001 AssessmentYou + us02 Design & written quoteUs03 FortisBC applicationFortisBC04 PermitsUs05 Install daysCrew06 InspectionInspector07 Interconnection & switch-onFortisBC + you Our workUtility or inspector
FIG. G A typical home takes 6–10 weeks from first visit to switch-on. Install day itself is the short bar.
Timeline as a table
StepWhoWeeksWhat happens
AssessmentYou + us0–1Bills, roof, panel box, shade. Usually one visit or a video call.
Design & written quoteUs1–2Panel layout, single-line drawing, price, timeline and payback in writing.
FortisBC applicationFortisBC2–5Net-metering application; FortisBC reviews it and approves construction.
PermitsUs3–5Technical Safety BC electrical permit; a City of Kelowna building permit if structural work is involved.
Install daysCrew5–6Usually 1–3 days on site for a home: mounts, rails, modules, inverter, wiring.
InspectionInspector6–7Electrical inspection of the finished work under the permit.
Interconnection & switch-onFortisBC + you7–9Interconnection Agreement signed, meter set for net metering, system commissioned.

QUESTIONS

Questions about residential

  1. Q01How much does solar installation cost in Kelowna?
  2. Q02Do I need a permit to install solar in Kelowna?
  3. Q03Will solar panels damage my roof?
  4. Q04Should I replace my roof before installing solar?
Q01How much does solar installation cost in Kelowna?

Most home systems in Kelowna cost between about $14,000 and $37,000 installed, depending on size. A typical 8 kW system is about $20,900 to $26,000, roughly $2.60 to $3.25 per watt. Smaller systems cost more per watt because permits, design and set-up cost about the same at any size.

There is no rebate to subtract on FortisBC, which serves Kelowna. A right-sized 8 kW system saves about $1,490 in its first year and pays for itself around year 14.

Q02Do I need a permit to install solar in Kelowna?

Yes. Every grid-tied system needs an electrical installation permit from Technical Safety BC, pulled by the licensed electrical contractor, and an inspection. A City of Kelowna building permit can also be needed where structural work is involved. FortisBC must approve the system before it is connected.

Q03Will solar panels damage my roof?

Not when they are installed properly. Each mount is bolted into a rafter and sealed with flashing that sits under the shingle above it, the same way roof vents are detailed. On tile roofs we use tile hooks or flashed replacement tiles. We photograph every penetration so you have a record.

Q04Should I replace my roof before installing solar?

If your roof has less than about ten years left, usually yes. A system lasts 25 years or more, and taking it off and putting it back for a re-roof later costs roughly $3,000 to $5,000 on a typical home. We check roof age on the first visit and can coordinate with your roofer.

WORK ORDER № SIK-011

Start with a free assessment

Tell us where the property is and what you’re after. We reply within one business day with next steps, or a straight answer if solar doesn’t suit it.

OR CALL250-250-2525

  • A year of FortisBC bills helps most
  • A photo of your electrical panel, door open
  • Plans for an EV, heat pump or pool

Free and no obligation. We use your details only to reply.

CallBook