FortisBC or BC Hydro? Check your billCall 250-250-2525
SOLAR INSTALLATIONKelowna

CENTRAL & NORTH KELOWNA

Solar Installation in Landmark District, Kelowna

Homes, suites, strata and commercial roofs in Landmark District, installed with the paperwork handled and the timeline in writing.

Leafy residential street near downtown Kelowna with a craftsman-style home carrying black solar panels

LOCAL NOTES

Installing solar in Landmark District

The Landmark District is Kelowna’s office and commercial hub, the cluster of towers, medical offices and retail between Harvey Avenue and Springfield Road. Its buildings use most of their power during working hours, exactly when solar produces. That makes the payback on a flat commercial roof here faster than on a house with the same number of panels.

Most Landmark buildings are leased, so the first question is who owns the roof and who pays the power bill. We put one plan in front of both. FortisBC’s net-metering program caps a system at 50 kW per account, a large array for one building and plenty for most offices and clinics in the district.

Call 250-250-2525 with a rough idea of your monthly bill. For most Landmark District homes that is enough to tell whether a visit is worth your time.

Ballasted solar array in neat rows on the flat roof of a low-rise building
FIG. L1 Typical of central & north kelowna installs.

UTILITY

Your utility in Landmark District: FortisBC

Landmark District is in FortisBC’s service area, like the rest of the City of Kelowna. That means no BC Hydro rebate, but you keep FortisBC net metering: surplus is banked as kWh and used later in the year, with any leftover settled once a year. Check the name at the top of your bill to be sure.

FortisBC vs BC Hydro in 2026

Utility
FortisBC
Rebate
None on FortisBC
Exports
kWh bank, yearly settlement
Size cap
50 kW per account
8 kW payback
about year 14

INSTALL NOTES

Landmark District: what shapes the job

In Landmark District the roofs we see most are detached houses with suites, townhome rows and flat commercial or strata roofs. Each takes a slightly different route through approvals, so the first visit sorts out who has to sign off before anything is ordered.

  1. N1

    Ballasted racking on membrane roofs, checked against the building’s structural capacity and snow load.

  2. N2

    Rooftop mechanical units and parapets throw more shade than people expect; we model them before quoting.

  3. N3

    Work can be booked for evenings or weekends so tenants and patients aren’t disrupted.

PRICE

Installation prices for Landmark District homes

City lots usually mean simple access and lower labour. Strata drawings and engineering letters, where needed, are listed separately in the quote.

SystemInstalled priceFortisBC: year-one value · paybackBC Hydro: net of rebate · payback
5 kW 12 panels · ~6,000 kWh/yr home$14,000 – $17,500$930 · year 15$10,600 after $5,000 · year 13
8 kW 19 panels · ~9,600 kWh/yr home$20,900 – $26,000$1,488 · year 14$18,200 after $5,000 · year 14
10 kW 23 panels · ~12,000 kWh/yr home$25,500 – $31,700$1,860 · year 14$23,300 after $5,000 · year 14
12 kW 28 panels · ~14,400 kWh/yr home$30,100 – $37,400$2,232 · year 13$28,400 after $5,000 · year 15

Installed price ranges, not quotes, as of October 2026. Each size assumes a home using about as much as the system makes (1,200 kWh per kW a year). FortisBC value at about 15.5¢/kWh; BC Hydro shown for comparison (rebate, 40% self-use, 10¢ exports). Paybacks use the mid price and a 3% yearly rate rise.

Book an assessment Installation cost guide

TIMELINE

How long an install in Landmark District takes

Strata or landlord approval usually adds two to four weeks at the front of the timeline. Start that conversation early and it rarely delays install day.

Every step explained

Typical Kelowna home solar installation timeline Seven steps over about nine weeks: assessment in week 0 to 1, design and quote in week 1 to 2, FortisBC application in weeks 2 to 5, permits in weeks 3 to 5, installation in week 5 to 6, inspection in week 6 to 7, interconnection and switch-on in weeks 7 to 9. W0W1W2W3W4W5W6W7W8W9W1001 AssessmentYou + us02 Design & written quoteUs03 FortisBC applicationFortisBC04 PermitsUs05 Install daysCrew06 InspectionInspector07 Interconnection & switch-onFortisBC + you Our workUtility or inspector
FIG. G A typical home takes 6–10 weeks from first visit to switch-on. Install day itself is the short bar.
Timeline as a table
StepWhoWeeksWhat happens
AssessmentYou + us0–1Bills, roof, panel box, shade. Usually one visit or a video call.
Design & written quoteUs1–2Panel layout, single-line drawing, price, timeline and payback in writing.
FortisBC applicationFortisBC2–5Net-metering application; FortisBC reviews it and approves construction.
PermitsUs3–5Technical Safety BC electrical permit; a City of Kelowna building permit if structural work is involved.
Install daysCrew5–6Usually 1–3 days on site for a home: mounts, rails, modules, inverter, wiring.
InspectionInspector6–7Electrical inspection of the finished work under the permit.
Interconnection & switch-onFortisBC + you7–9Interconnection Agreement signed, meter set for net metering, system commissioned.

WORK ORDER № SIK-017

Book an assessment in Landmark District

Tell us where the property is and what you’re after. We reply within one business day with next steps, or a straight answer if solar doesn’t suit it.

OR CALL250-250-2525

  • A year of FortisBC bills helps most
  • A photo of your electrical panel, door open
  • Plans for an EV, heat pump or pool

Free and no obligation. We use your details only to reply.

CallBook